This design is based on HVS-series vickers hardness tester added with CCD camera.15" TV which shows the measured picture. increased the accuracy of the measurement shows the clear view of picture ａnd decrease the error due to the human operation .therefore upon the release .it is welcomed by the university science unit state ａnd private owned enterprises. as well as foreign company.
Usage Range: Heat treated layer carbonized layer hardened hard layers superficial coating steels non-ferrous metal micro ａnd thin shaped components.
會員服務熱線：010-62681193
京公網安備 11010802023672號
HVS-1000視屏測量顯微硬度計
本系列視屏測量顯微硬度計是在顯微硬度計上，通過CCD彩色攝像頭光學接口，直接能在顯示屏上測量完成。增加了測試的速度和靈活性，提高了測量精度，體現了像質的清晰度，減少了目鏡系統人為的操作誤差，能滿足各種顯微硬度測試要求。
適用范圍
熱處理、碳化、淬火硬化層，表面覆層，鋼，有色金屬，微小及薄形零件等。
This design is based on HVS-series vickers hardness tester added with CCD camera.15" TV which shows the measured picture. increased the accuracy of the measurement shows the clear view of picture ａnd decrease the error due to the human operation .therefore upon the release .it is welcomed by the university science unit state ａnd private owned enterprises. as well as foreign company.
Usage Range:
Heat treated layer carbonized layer hardened hard layers superficial coating steels non-ferrous metal micro ａnd thin shaped components.
技術數據(Technical Specifications)
試驗力
(Testing Force)
10gf (0.098N）、25gf (0.245N)、50gf (0.49N)、100gf (0.98N )、200gf (1.96N)、300gf (2.94N)、500gf (4.9N)、1000gf (9.8N)
轉換標尺(Exchanging Scales)
洛氏、表面洛氏、布氏 ( Rockwell Superficial Rockwell Brinell)
小測量單位(Min Measuring Unit)
0.031μm
放大倍數
Magnification of Microscope
100X（觀察 For Observation ）400X（測量 For Measurement）
數據輸出 (Data Output)
內置打印機和RS-232接口 ( Inside Printer and RS-232 Interface)
加荷控制(Loading Control)
自動（加荷、保荷、卸荷） Automatically (load keep unload)
保荷時間（Dutation Time）
0～60sec selectable
儀器尺寸(Overall Dimension)
405×290×480mm （長×寬×高 L X W X H）
儀器重量( Net Weight )
試件大高度
(Max. Height of Specimen)
壓頭中心到機身大距離
(Max. Height of Speciments)
電源(Power Supply)
AC220V±5%，50~60Hz
執(zhí)行標準(Carried Standard)
GB/T4340.2標準(GB/T4340.2 Chinese Standard)
JJG151規(guī)程 ( JJG151 Inspection Rule )
標準配件 附件
Standard Accessories
物鏡40x、10x，微氏壓頭，測量目鏡10x，標準硬度塊（2），薄形試臺、圓柱體試臺、平口試臺，水平儀，電源線，輔助工具等
Objectives 40x and 10x Vickers Indenter Microscope 10x Standard Hardness Brocks: 2 pcs Thin Specimen Testing Table Column Testing Table Forcipate Testing Table Lever Power Cable Assistant Tools etc